Amatex Engineering srl (Urgnano - Bergamo - Italy)

 

Production programme: Foulard   Drier   Stenter   Brushing   Park Station   Lines   Other Machines   Office
STENTER_EVENER
The stenter evener manufactured by Amatex Engineering is a simple machine consisting of two sturdy shoulders connected by cross-pieces, which are used also for the sliding of the chain-carrier tables; the wheels on the bottom allow the machine to slide on rails depending on the fabric tension direction and intensity.
The various machine models depend on the length of the chains, foreseen in 1200 1600 and 2000 mm.; the height and the entry of the shoulders are adjusted by means of motorised gears, whereas the fabric, having a height ranging between 1800 and 3600 mm., is perfectly guided by the two tracer points.

At the entry two stretching cylinders and two manually tracer points are installed, which can be adjusted manually according to the height of the fabric being worked. The height of the tweezer holder chains is controlled by an exit gearmotor keyd on two screws, one on the right, the other on the left, whereas the inward movement of the tables is guided by telescopic tubes activated by their relevant gear-motors, which are synchronised with the previous one. Under each table two limit-switches are placed that are necessary to limit the motion angle. To grip the fabric, the two motorised chains carry a series of mignon tweezers, whereas the lubrication of the chains is guaranteed by a centralised automatic unit with resistor feeders

See drawing

 
Amatex Engineering srl, Via Provinciale, 104 - 24059 Urgnano (BG) - Tel. +39/035/898366